Close

Registration

Profile Informations

Login Datas

First name is required.
Last name is required.
First name is not valid.
Last name is not valid.
This is not an email address.
Email address is required.
This email is already registered.
Password is required.
Enter a valid password.
Please enter 6 or more characters.
Please enter 16 or less characters.
Passwords are not same.
Terms and Conditions are required.
Email or Password is wrong.

POLISH III Heavy Cut High Performance Cutting Compound (SK2013)

Be the first to review this product

Availability: In stock

Product Name Price
Polish III Heavy Cut High Performance Cutting Compound | 32 oz
Polish III Heavy Cut High Performance Cutting Compound | 1 gallon

Quick Overview

Polish III  Heavy Cut Cutting Compound  The Heavy Cut 550 is a fast cutting, heavy-duty compound.  It uses a blend of both diminishing abrasives and non-diminishing abrasives to cut fast and then polish with a smooth, glossy finish. The product was produced for fast cutting for fiberglass finishes (used for Aircraft, boats, motor homes, Auto and ) and for fast cutting after paint repair and sanding with 1000 – 1200 grit sandpaper.

POLISH III  Heavy Cut High Performance Cutting Compound (SK2013)

More Views

Details

DESCRIPTION AND USES:

The Heavy Cut 550 is a water-based emulsion that contains only food grade ingredients.  It exceeds California Air Resources Board regulations for VOCs  (only contains 1 grams/liter) and exceeds all EU environmental and safety regulations.  It does not contain crystalline silica or any type of harmful abrasive powder.

 

The product can be used with any type of pad.  For fast cutting, use a wool-cutting pad.  For milder cutting and better finishing, use a foam-cutting pad or a Euro Foam style pad. 

 

Application:

The surface should be clean and dry before buffing.  Apply about a quarter-sized dab of product to the paint surface and spread over a 2’ x 2’ area using slow speed to prevent flinging.  Increase speed to 1500 – 2000 rpm and buff the area using overlapping motions to remove sanding scratches, oxidation, etc.  Continue buffing until product is almost completely gone.  Remove any residue with a microfiber towel.  Examine area to make sure all imperfections were removed.  If necessary repeat buffing a second time.

 

Use after polishing:

For paint surfaces, follow with the SK2014 with a euro style foam pad to create a flawless finish.

Follow with SK2014 and than whit SKY-Shield  Anti-Corrosion Paint Protectant SK2016. Specifically made for paint protection with a slick and high gloss shine. Paint sealant for new and old paint. Contains 4 Different polymers that create a high gloss and durable finish long lasting paint protection.

Additional Information

Call For Price No