SKY-101 Nano-Tech Permanent Bond Coating

SKU: SK101 Category:

SKY-101 9H Diamond Nano-Tech Permanent Bond Coating – (9H type coating) 50ml This will create a harder, thicker more durable coating.  It will also bead water better. However, it is more expensive to manufacture and slightly more difficult to apply.

SKY-101 9H Diamond Nano-Tech Permanent Bond Coating. 2 oz bottle. 

METHOD OF USE:

  • surface should be cool and dry before applying product
  • Spray a light mist of water onto one panel of the surface.
  • Place 2 – 4 drops of product onto the applicator sponge
  • Apply coating to the panel by using an up and down, then left & right overlapping motions to make sure the product is thinly and evenly applied
  • Allow to dry for a few minutes  If it is over 90 F only wait 1 – 2 minutes.  If it is between 60 and 70, wait approximately 3 minutes.  If it is cooler than 60 F, wait approximately 5 minutes.
  • Take a damp towel and lightly wipe the area to spread the product evenly over the surface.
  • Then, take a dry micro-fiber towel and lightly buff the area to a slick, high shine.

The product will dry to the touch within 10-15 minutes depending on temperature and will take approximately 2-5 days to fully harden depending on the temperature and humidity.  Hot, humid weather will result in faster curing as the coatings react with the moisture in the environment to create a tough, matrix structure similar to quartz.

Made in USA

Additional information

Size

2 oz

Call Now Button